Description
The SG2674 MIPI RFFE controller is a serial bus control interface module, supporting dual-channel MIPI RFFE interface protocols. It is commonly used for testing by R&D, production, QC, and other departments. Subsequent testing scripts can be built in according to customer’s requirement, and the automatic configuration or test of the RF module can be completed through the trigger interface.
The main function of the product is to provide a general hardware interface (USB 2.0 or Ethernet) and management interface protocol (customer-defined) for the PC (or MAC) to allow the adaptation of the DUT interface and DUT configuration management. The management interface protocol includes the management of the module itself and the DUT configuration interface. The module completes the conversion between the management interface and the RFFE protocol interface. DUT interface adaptation mainly refers to the hardware characteristics of the module the high-speed serial interface and can configure the hardware level and clock of the interface according to the requirements; meanwhile, DUT power supply interface can be added according to the customer’s needs, and the power supply voltage Vpwr can be configured. The module supports voltage measurements of VIO and Vpwr.
Basic Parameters of Control Panel
Processor Core | Single Core ARM Cortex-A9 MPCore |
Maximum Frequency | 766 MHz |
External Storage Support | DDR3, DDR3L, DDR2, LPDDR2 |
Key Peripherals | USB 2.0, Gigabit Ethernet, SD/SDIO |
Dedicated Peripheral Pins | Up to 128 |
Logical Unit (K) | 23 |
Block RAM (Mb) | 1.8 |
DSP Slice | 60 |
Maximum I/O Pins | 100 |
Basic Parameters of Controller
Power Supply | 12 V,3 A |
Ethernet | 10/100/1000 M,1 Channel |
USB 2.0 | 1 Channel |
Trigger Input | 1 Channel |
RFFE Interface | 2 Channel(DB15 Female Connector) |
Work Environment | 0 to 50℃/ 0% to 80% R.H. |
Storage Environment | -40 to 70℃ / 0% to 80% R.H. |
Size | 115 mm * 115 mm |
Thickness | 30 mm |