MIPI Grabber

MIPI Grabber

  • Zynq UltraScale+ MPSoC processor core is Quad-core ARM Cortex-A53 @ 1.5 GHz, Dual-core ARM CortexTM-R5 @ 600 MHz and Arm Mali™-400 MP2 GPU, with 192 K programmable logic resources and 728 DSP compute units.
  • Sensor module interface supports 5-way control power supply and can be configured with MCLK, DIO and 4Lane MIPI DPHY
  • Provide 1 HDMI Source interface and 1 HDMI Sink interface, both support 4K@60Hz
  • Provide extended 16-channel DIO, 1-channel COM port, and one-channel IIC
  • Provide 1 Type C (USB 3.0) slave interface, 4 USB 3.0 host interfaces
  • Provide 8-channel 0-10V analog input signal measurement
  • Support sensor module open and short circuit detection
  • Support dual-channel Sensor module acquisition
  • Provide 1-channel 5V/1A power supply
  • MIPI D-PHY supports 2.5 Gbps/lane
  • Provide 1-channel 1000M network port

Description

SG2153 MIPI Grabber platform is an embedded camera sensor module test system based on ZYNQ (Xilinx FPGA+ARM) platform. MIPI Grabber supports MIPI CSI-2 V1.1 protocol standard and is an integrated platform used for image acquisition, image analysis and image testing of camera modules. The product is commonly used for testing by R&D, production, QC, and other departments. Subsequent testing scripts can be built in according to customer’s requirement, and the automatic configuration or test can be completed.

Main Parameters

Function Description
APU (Application Processing Unit) Quad-core ARM Cortex-A53 @ 1.5 GHz
RPU (Real-Time Processing Unit) Dual-core ARM CortexTM-R5 @ 600 MHz
On-Chip Memory 256 KB on-chip RAM (OCM) in PS with ECC
External Memory Interfaces DDR4, DDR3, DDR3L, LPDDR3, LPDDR4
Programmable Logic Cells 192 K
Flip-Flops 176 K
Look-Up Tables (LUTs) 88 K
Total Block RAM 18 MB
Programmable DSP Slices 728
MIPI D-PHY 2.5 Gbps/ lane
PL SerDes 16 x GTH Transceiver 16.3 Gb/s
Type of IOs MIPI D-PHY/ LVDS/ LVCMOS33/ LVCMOS18
Power Consumption < 25 W